Case Studies - Oil & Gas
Filter by
Service
Filter by
sector
Aviation
Booster Stations
Commercial Lines
Compressor Stations
Construction
Distribution Stations
Electricity
Energy
Gas
Gas Storage
Gas Treatment Stations
Generation
Hydroelectric Energy
Marine
Oil & Gas
Overhead Power Lines
Pipe Lines
Renewables
Step-up Transformers
Sub Stations
Utilities
Utility, Agricultural & Industrial Consumers
Wastewater Networks
Wastewater treatment Plants
Water
Water Networks
Water Resources
Water Treatment Plants
Offshore HVACR Upgrade for FPSO Facility in West Africa
An offshore Floating Production Storage and Offloading (FPSO) facility operating off the coast of West Africa required a major upgrade of its HVAC and...
Fixing Galley Cold Room issues on an offshore asset
Our client’s platform was having major issues with the central refrigeration plant serving the Galley. ...
Eliminating CUI and Enhancing Efficiency on Oil Heater with Thermally Insulated Paint System
TEXO’s Fabric Maintenance Manager reactedvery positively and swiftly to my request for a new innovative solution to the problems that we were experie...
3D Scan Capture & UAS Photogrammetry
As built 3D Reality Capture of a Jack Up Rig in the North Sea Offshore Industry utilising a combination of high accuracy dimensional control establish...
Bespoke Flange Training Rig
Our client asked us to manage the full fabrication, welding, testing and paint coatings of a bespoke Flange Training Rig (FTR)....
Ultra-Deep-Water Drilling Project: X-Tree Sea-fastenings & Deployment
TEXO Engineering & Fabrication was awarded the project to deploy four Baker Hughes X-trees to a 2700m ultra-deep water drilling project off the coast...
Design modifications and fabrication of a wireline slewing frame
We were awarded a contract by an oil and gas service company to manufacture a new prototype slewing wireline support frame, which needed to be install...
Full fabrication and assembly of Blending Skid Base Frame
TEXO Engineering & Fabrication was asked to fabricate a Blending Skid Base Frame complete with internal pipework with full assembly trial fit, inspect...
Delivering Access Platform Upgrade to North Sea Jack-Up
We were able to demonstrate that our wide range of in-house capabilities and experience can deliver projects on time and on budget. ...
Multi-disciplinary project for DRILLSHIP Spooler Bridge
TEXO provide the data you require to make operationally critical decisions whilst minimising disruption by creating highly accurate 3D models of offsh...
TEXO PIONEERS UNMANNED INSPECTION
TEXO has successfully pioneered a new unmanned inspection method on a major UK North Sea FPSO, delivering significant safety, time, and cost-saving be...
Multi-disciplinary project for well test overboard vent line
This project used the full breadth of our multi-disciplinary approach to client work and presented a number of challenges to the team....
Re-naming the Gabrus offshore drilling jack-up rig
This was a last-minute requirement from the client, and we had to mobilise quickly to remove the old details and add the new ones over a seven-day per...
Mud Lab upgrade for new offshore client
Our client is an offshore decommissioning operator, looking for a complete Mud Lab upgrade. They were looking for a supplier that could manage the ent...
FAST TURNAROUND BY MODULAR BUILD TEAM ON ROV CONTROL CABIN
Following an urgent request for an A60 Safe Area ROV Control Cabin just before the festive break, the modular build team at TEXO Workspace Solutions h...
VSD Container for Valaris 123 Installation
TEXO Workspace Solutions were requested to carry out the Design, Manufacture and Testing of an insulated and lined VSD Switchgear container for the Va...
Using our Digital Skills to Work Collaboratively with NZ Design Team
Our client’s end asset is based in New Zealand. They asked us to design a diesel bunkering line, which needed input from teams in the UK and in New Ze...
Extending Flare Boom Project to Include Hull Inspections
TEXO Asset Integrity was contracted on a project scope that covered flare tip and flare boom inspections. Our client extended the team’s deployment to...
Improving Heavy Lifting Safety at the Port of Blyth
TEXO Port Services has a duty of care to ensure safety during quayside operations. Moving cargo and equipment from vessel to dock requires heavy lifti...
Vent Line Pipe Clamp Design & Manufacture
TEXO Engineering & Fabrication was commissioned by our client to carry out an offshore survey of the Stbd Leg to allow for a method of supporting an 8...
Replacing Mud Pump Pressure Relief Valves
TEXO Engineering & Fabrication was commissioned by our client to carry out an offshore survey of three Mud Pump Pressure Relief Valves (PRVs) and asso...
Aft Mast Fabrication for Clients New Ferry
One of TEXO’s new clients in the marine sector after completion of the tendering and audit process were awarded the Aft Mast Fabrication for one of it...
Multi-disciplinary Solutions for Platform Interfacing on Client Decommissioning/Plug and Abandonment Campaign
The Client asked us to look at the Interface between the Jack-Up Rig and the fixed Installation by means of a bridge access platform. Our client’s req...
11,000 Man-hour Fabric and Maintenance Programme for Valaris
Valaris commissioned TEXO Asset Integrity to work on the Gorilla V, and offshore drilling jack-up rig. The fabric and maintenance project included the...
Offshore Wet-Room And Dry Store Floor Replacement
We were approached by a current client and asked to survey and provide a proposal to remove the existing floor and to put down new floor finishes in 3...
Multi-discipline Approach to Pressure Piping Inspections
TEXO Asset Integrity was commissioned to perform a visual and NDT inspections of pressure piping, onboard an operating semi-submersible drilling facil...
DROPS remedial survey onboard a pipe-lay vessel
TEXO Asset Integrity mobilised a multi-disciplined, multi-skilled rope access team to conduct a DROPS survey, and then complete maintenance and undert...
Modular One-Man Hotel, Caithness
James Fisher Nuclear is currently creating a base in Bower Caithness, Scotland, for an ongoing decommissioning project...
Tolmount Platform Interface
TEXO Engineering and Fabrication was contracted to carry out the design, construction and installation of this platform interface. The project also re...
Pioneering Unmanned Inspection of North Sea FPSO Cargo Tank
TEXO successfully pioneered a new unmanned inspection method on a major UK North Sea FPSO, delivering significant safety, time and cost saving benefit...
Texo DSI Delivers 3D Digital Twins in the North Sea
The Eider Alpha, North Cormorant, Cormorant Alpha and Tern Alpha platforms in the northern North Sea are currently in late-life operations, and TAQA w...